Sine wave filter plus EMC, with DC link connection Rated Current 10A

Sine wave filter plus EMC, with DC link connection Rated Current 10A

Sine wave plus EMC filter  Description :

This is a Sine Wave and EMC Output Filter for Motor Drives with a DC Link Access. It will eliminate the disturbance between phase and ground. Normal sine wave filter only works between phases. With improved sine wave filter you can use unshielded motor cables with good EMC performance. You can use old motor cables and still keep in EMC category C2. The best choice for energy saving for existing motors. 


Sine wave plus EMC filter Technical Data:

Smoothing of PWM drive output voltage

Efficient motor protection

Reduction of common-mode interferences on motor cables

Improvement of EMC environment

Elimination of motor bearing damages

Possibility to use very long unshielded motor cables

Improvement of system reliability

Motor frequency : 0 to 100 Hz

Switching frequency : 6 to 16 kHz

Rated current : 4 to 16 A

Motor cable length : ≤1000 m

Motor power : 1.5 to 7.5 kW

Voltage : 220 to 690 V


Sine wave plus EMC filter Technical Standards:

Capacitors:CEI EN 60831-1/2,IEC 831-1/2

Equipment:CEI EN60439-1,IEC 439-1,IEC /EN 60939

Filter
Nominal Current Range (A) 10
Nominal Voltage range (V) 400
Phase 3 Phase
Power range (KW) 5.5
Switching Frequency 6-16KHz

Write a review

Please login or register to review

This is a Demo Shop. You can place your order, but please contact us before you pay.

  • Views: 16831
  • Brand: SIKES
  • Product Code: SKS-SF-0010-4C2/DC-L
  • Availability: In Stock

Tags: Sine wave filter plus EMC