Inquiry or Customize your Products
You will receive our feedback within 12 hours,unless the email you offered is incorrect.
General regenerative drive for inverters and servo motor
Description of Regenerative drive:
This
series adopts microprocessor chip with fast respond, high-accuracy
process control, which is safe, stable and reliable for operating. It
can make the inverter operating in four-quadrant, continuously
feedback,and regenerative braking frequency below 40%. Electric
regeneration efficiency up to 97%. Using SPWM modulation to greatly
reduce distinctive peaks of current and form perfect sine wave current,
input side current THD lower than 5%, power factor up to 99%.It can
prevent power grid flowing back, overheating, overcurrent, out of phase,
undervoltage,and short circuit.
Characteristics of this series:
Power range:7.5KVA-500KVARated current: 75-1200A
Working DC power voltage: DC 620V
Output AC power voltage : three-phase AC 400V
Chopper voltage: DC620V±5V
Operating frequency: 46-60Hz
Accuracy index: setting error less than 0.5%
Overload capability:110% long-term,150% 1min,180% 2s.
Adaptive Connectioin Mode: No need to identify plus-n-minus when connect to inverter or power grid, very easy to connect.
Working conditions: containing built-in intelligent fan, high and low order harmonic filter, external short circuit protection.
Protection class: IP20
Protection function: OCP,OVP,UVP,overheating protection and polarity protection.
EMC: Accord with GB/T 17626.4( IEC61000-4-4)4 class EFT interference test;GB/T 17626.3( IEC61000-4-4)4 class radiation EMF test;GB/T 17626.2( IEC61000-4-4)4 class ESD test.
Environmental ambient temperature: -10℃~+60℃(non-frozen)
Ambient humidity: below 90%(non-frost)
Altitude: less than 1km
Cooling mode: forced-air cooling
Installation method: wall-mounted, floor type
Standard: ISO,FCC,CE
Application of Regenerative drive:
General regenerative drive Dedicated for all inverters and servo motor.Regenerative drive and Braking unit | |
Efficiency | >97% |
IP Class | IP20 |
Nominal Current Range (A) | 75-1200 |
Operating Frequency | 46-60Hz |
Output Voltage(V) | 400 |
Power range (KW) | 7.5-500 |
Chopper Voltage (V) | 620 |
Certificates : http://sikes-elec.com/Certificates.html
This is a Demo Shop. You can place your order, but please contact us before you pay.